Izdelki za olje in (17)

Sunflower Oil for (technical and food or feed) use. Min 25 tons DAP, FCA, FOB

• Steam Sterilized Spices. • The quality of spices tested by professional chefs. • Professional quality - All spices go through 7 stages of purification process. This process meets high quality food safety standards, which protect the key features of the spices, such as essential oils, curcumin and capsaicin that contribute to the flavor, aroma and health benefits of the spices. ▪ See-through packaging, where you can see the product quality well. ▪ Doypack with a convenient zip-lock, which allows to maintain the freshness of the products by protecting them from the environment.

GlobeCore manufactures oil regeneration systems for both transformer manufacturers and for transformer service providers. GlobeCore units are loaded with a sorbent that captures all oil decomposition products. GlobeCore regeneration systems can use the same sorbent for up to 3 years before the first replacement. No more need for consumables and costly labor related to replacement of exhausted sorbent on the job site. Regeneration systems can be combined with degassing units or can be purchased as stand-alone systems. GlobeCore regeneration systems can be used in combination with your existing degassing or drying unit. Each GlobeCore unit can be customized and includes a number of options: An extra vacuum pump assembly for transformer vacuuming Mounted on a trailer or a semi-trailer Inlet and/or outlet moisture meters for the oil stream Remote control and process monitoring via smartphone or PC Climate Controlled Operator work room.

Intended for purification of sunflower oil seeds. Flow capacity: 100 L/h

Pendant le stockage et le fonctionnement, l’huile du transformateur peut entrer en contact avec l’air et les gaz, ce qui réduit sa force électrique de 20 à 30% (s’il n’y a pas de bulles). L’air dissous dans l’huile et dans les isolants solides réduit la résistance électrique de l’ensemble de la structure d’isolation du transformateur, ce qui entraîne le développement de décharges électriques. La station d’épuration d’huile CMM-0.6 empêche les phénomènes décrits ci-dessus. les performances de l’huile de transformateur sont également fortement affectées par la contamination par des impuretés mécaniques et la présence d’humidité. Le dégazage et le nettoyage du liquide isolant avant sa coulée dans l’appareil permettent de garantir une bonne dissipation de la chaleur des parties chauffantes du transformateur et l’isolation des éléments porteurs de courant.

<ahref="https://globecore.com/fr/products/oil-processing-equipment/degassing-thermal-vacuum-drying-oil/cmm-0-6-oil-filtration-oil-degassing-cart.html" >L’unité mobile de dégazage</a> CMM-0.6 est utilisée pour filtrer, pomper, chauffer et dégazer les huiles isolantes, ainsi que pour éliminer les particules solides et l’humidité. Capacité de l’unité – 0.6 m3/heure. L’unité est composée d’une colonne à vide, d’un réchauffeur d’huile en céramique, d’une pompe, d’une pompe à vide et d’un système de filtraL’unité mobile de dégazage CMM-0.6 est utilisée pour filtrer, pomper, chauffer et dégazer les huiles isolantes, ainsi que pour éliminer les particules solides et l’humidité. Capacité de l’unité – 0.6 m3/heure. Lors de l’entretien d’un transformateur à haute teneur en humidité dans l’huile, il y a toujours la possibilité de moussage, mais l’unité permet d’éviter des préoccupations de cette nature.

Brand new in box. Closed-cycle oil extractor. Mark 1 has one extraction tank, Mark 2 has 2 extraction tanks. The Green Power Top Fill Closed Loop Extractor comes with a 10 year warranty and comes with a number of optional upgrades to improve the extraction of plant material. Ideal for making oils from medicinal plants, lavender, rose and other materials. An efficient way to mine. Made of high quality corrosion resistant stainless steel. -Obtaining an extract of essential oils that are beneficial to health, such as lavender. -All the clamps and gaskets you need in the box to set up and start mining - just use gas - Installed heavy duty high pressure clamps and gaskets. -Polished interior and exterior -Installed pressure gauge - Unmatched recovery of essential oils like lavender, etc. - Complete disassembly possible for easy cleaning and maintenance -High quality parts for both personal and professional use

A transformer is a device for converting electric energy at one voltage level to electric energy at another voltage level through the action of a magnetic field. It plays an extremely important role in modern life by making possible the economical long-distance transmission of electric power. Most power system transformers fall into two types of construction, dry-type or liquid-immersed type. Dry-type include air insulated and solid insulated construction. Solid insulation is usually an epoxy resin. Liquid-immersed types use various forms of oil and special synthetic liquids. These transformers usually have some form of an external radiator to dissipate the heat generated internally by the windings and the core. The radiator is often the surfaces of the tank specially folded into corrugated fins or is in the form of fins, which are attached to the tank sides. We offer: Dry Type Transformers, Liquid-immersed (Oil Filled) Transformers, Transformers For Concrete Heating.

Sunflower fatty acids (acid oils) from chemical refining GMP+ or technical grade.

This GlobeCore mobile oil processing unit is designed for degassing, removal of solids and heating of oil for power transformers with voltage up to 1,150 kV. The unit can be used to: (1) heat electrical systems that contain insulating oil with hot oil; (2) for vacuum drying of transformers and (3) for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power transformers and other oil filled electrical equipment. The unit is not certified for use in and around explosive gases, toxic gases or other aggressive environments. When indoors or other enclosed spaces, exhaust gases must be vented to the outside through hoses or pipelines. no need to use adsorbents to dehydrate transformer oil; operation of equipment causes no air pollution or waste requiring storage and disposal; easy to operate and maintain; maximum oil specifications even after one treatment cycle; low power consumption; low noise level;

The oil seed purification centrifugal filter is designed to extract remaining oil from coarse of higher oil content. Loading: manual / automatic

L’unité CMM-6/7 est utilisée aux fins suivantes: 1-chauffage, pompage et traitement de l’huile utilisée comme isolant ou refroidisseur dans les équipements électriques (transformateurs, OLTC, , commutateurs haute tension, etc.). Le traitement à l’huile élimine des particules, du gaz et de l’eau.

The TOR-2 transformer oil express-tester is designed to determine the moisture and hydrogen content in mineral insulating oils and ether based insulating oils. Moisture and hydrogen content is measured in parts per million (ppm). Knowing the content of hydrogen and moisture in the oil, as well as the rate of parameter change, it is possible to detect problems developing in the transformer in advance and to take timely measures to prevent damage to the transformer. Moisture measurement The device measures the activity of the water using a capacitance sensor, which ensures stability over time and contamination resistance. The oil temperature is also measured. The moisture content is calculated from these measurements. Hydrogen measurement A highly selective solid state sensor immersed directly in oil is used to measure hydrogen content. The sensor ensures accuracy and reliability of direct measurements.

▪ Steam sterilization guarantees significant reductions up to 99.9% of aerobic plate counts, coliforms, yeast and mold load of the spice. The results are confirmed by manufacturer’s research protocol. SAFE FOR HUMAN HEALTH! ▪ Pripravka’s black pepper has 4% of piperine and 2,5% of essential oils. Therefore, our black pepper has a rich aroma and hotness. ▪ The pepper blend contains a savory ingredient - Ancho chili pepper. This is a variety of chili pepper of medium severity, native to Mexico. Ancho chili has a soft fruit and coffee taste with sweet aroma. ▪ 100% pure pepper, without impurities: spent, mustard and coriander.

TOR-1 is a device for quick and precise measurement of the moisture content in insulating oil, even in miniscule quantities. The high sensitivity and excellent long-term stability make this tester an ideal solution for constant control of moisture content in transformer oil. Operating principle The amount of water in the oil can be described as an absolute value in ppm or a relative value of aw: ppm is the ratio of moisture weight to oil weight; aw is the actual water content as a percentage of water content in fully saturated oil. A value of aw = 0 corresponds to completely dry oil, while aw = 1 corresponds to a completely saturated oil. The measurement with this sensor is based on exceptional long-term stability and resistance of capacitance sensor elements to contamination. The measured physical properties are water activity w and temperature T. Using these parameters, the device calculates the amount of water (ppm) in mineral transformer oil.

The unit is designed to measure the dielectric strength of transformer oil and other dielectric fluids according to IEC 60156, ASTM D877, ASTM D1816. It is a fully automatic device - allows testing according to the procedures defined in these standards, as well as according to the user procedures specified in the appropriate section of the setup menu. The core of the unit is the high voltage transformer and electronic modules. The unit operates by gradually increasing the voltage on the secondary winding of the high voltage transformer from zero to the maximum voltage, or to the voltage at which an electric breakthrough occurs in the dielectric fluid in the measuring cell installed on the high voltage contacts of the transformer. During operation, AC (50-60Hz) voltage is supplied from the secondary winding terminals through the cell electrodes into the dielectric fluid in the measuring cell.

The unit is designed for determining dielectric loss tangent and permittivity of transformer oils and other dielectric fluids according to the IEC 60247. It is a fully automatic device that allows testing according to the procedures defined in these standards, as well as according to the user procedures specified in the appropriate section of the setup menu. Operating principle Measuring the difference in amplitudes and phases of signals obtained when a test sinusoidal voltage with an effective value of up to 2 kV is applied simultaneously to the reference capacitor and the object of measurement, which is the measuring cell of the unit. The difference between the amplitudes of the signals taken from the reference capacitor and the internal electrode of the measuring cell is proportional to the dielectric constant of the liquid under study.